탁월한 가격 대비 성능을 갖춘 다양한 솔루션을 제공합니다.
컴팩트하고 인체 공학적으로 설계된 멀티 스핀들 선반 또는 슬라이딩 헤드는 샤프트형 부품측정에 최적화 되어있습니다.
간단한 피팅에서 최대 60 × 300mm의 작은 샤프트 까지 .
M (1) 제조에 사용을 개선하기위한 인간 공학의 개념을 포함한다.
이제는 더욱 빨라지고, 측정 시간이 줄어들고 그 분야에 새로운 기준이 설정됩니다.
The live image of the piece displayed by the software, combined with the LED illuminated extensive working area, gives a clear vision of the conditions of the component being measured.
The retractable sensors enabled during loading and unloading provide reinforcement, with additional one of a kind protective bumpers.
The ergonomic piece clamping lever has a considerably wide grip, which is suitable both for left and right-handed operators, and prevents obstruction of the view when clamping or unclamping the piece.
An increased load capacity allows elements up to 120 mm in diameter to be positioned.
The first pieces of every batch must be measured to set the machining center.
Performing this operation with M1 beside your machine saves up to 30’/1 hour and increases efficiency even in smaller batches.
| Model | Measuring field Ø x L |
Max. loadable sizes Ø x L – Peso |
Resolution Ø – L – Rotaz. |
Accuracy Ø – L |
Repeatability Ø – L |
Dimension L x P x H – Peso |
|---|---|---|---|---|---|---|
| M1 | 60 x 300 mm | 120×315 mm 10 Kg |
0.1 µm – 0.1 µm – 0.001° | 2+D[(mm)/100] µm 5+L[(mm)/100] µm |
0.4 µm 3 µm |
650 x 860 x 1041 mm 160 kg |
The brand new MTL 8.10 version is designed to improve the control phase and further extend the number of possible measurements. It includes specific tools for static and dynamic measurements, and dedicated tools for threads nuts, camshafts, turbines, etc.
New automatic features help the operator to get measurements: self-programming, automatic loading of the part program, step by step assisted programming, DXF comparison.
The software allows the operator to print or export complete and custom pdf measurement reports. Results of measurements on histograms for immediate consultation.